Do you have big-size shoes which you want to make smaller? One of the essential accessories for achieving a bright appearance is the shoe. Shoes come in a variety of shapes and sizes. However, you can receive a shoe in a bigger size by chance or as a gift from a friend who is unaware of your shoe size.
You are most likely not to wear them. However, in this post, you will discover how to make big shoes fit smaller.
How to make big shoes fit smaller? 6 Best ways
It’s not unusual to have a pair of too-large shoes in your wardrobe or to want to borrow a pair from a friend, but they are too big. It’s possible that your shoes have loosened due to excessive wear or that they don’t suit you properly during the winter because your feet shrink in the cold. Whatever the case may be, we’re here to assist you in making them snug and comfortable once more.
1. Start Stocking up ON SOCKS
Choosing to wear an additional pair of socks is the first and most important trick you can use to help your shoes fit better when they are too loose. Alternatively, a single pair of thicker-than-normal socks will fill up all the gaps.
This is the simplest and least expensive method of resolving the problem. There’s no need to go out of the way for this form because everybody has a sock drawer full of pairs. It is an excellent option for anyone looking to repair their boots or athletic shoes because those are the two types of shoes that involve the use of socks
Unfortunately, this solution may not be suitable for other pairs of shoes, especially open ones that do not need socks. Furthermore, if the weather is hot and you wear two pairs of socks, your feet will sweat. They could also end up stinking up the shoes in the end.
2. Fill in the spaces that are Open.
You can always use that approach if you’re in a hurry but don’t have time to fuss about getting your shoes to suit you perfectly. To fill empty space at the tip of the foot, all you need is some toilet paper, cotton pads, tissue paper, or even an old rag.
This is particularly useful if your foot keeps slipping between the back and front of your shoes when you’re wearing them, and it’s a quick fix if you’re in a hurry.
Since you can’t see the extra paper in your toes, this method is perfect for flats that don’t fit well, boots with extra space, or even close-toed heels.
3. Make an investment in insoles.
Shoe inserts are a suitable choice among many people who have too-big shoes. It is a perfect way to balance out the shoe gap and give your feet some additional support.
Bear in mind that the insoles you get are not permanent, and you will need to replace them at some point. Gel or latex foam insoles should be avoided if you want your shoes to last.
If you’re using products frequently, they can wither away easily. Sure, they can seem ideal when your feet hurt, but once the material inside wears out, there will be very little cushioning between your foot and the shoe, and you’ll be right back where you started.
Instead of these two options, consider a Peron insole. Peron is a long-lasting material. It is a robust or supportive material that is commonly used in orthotics. The best thing about this technique is that you can use it in any shoe when using insoles.
4. Apply shoe pillows in the form of the ball of your foot
If you find that adding a complete insole to the bottom of your shoes is too painful and causes your shoe to become too thin, this is the ideal solution for you. To get the shoe extra accommodating or more fit, we could use a unique pillow made to be located at the ball of the foot within the shoe.
It’s designed for shoes that are just a smidgeon too large for you and make a complete insole uncomfortable. These cushions are available in various colors, shapes, and sizes and are ideal for ill-fitting flats or high heels.
5. Strips to stick in your shoes
Adding a different form of cushion to a shoe that is just significantly too large is another choice. These are similar to the cushions we discussed earlier that go at the ball of your foot, except they go right above the heel when a shoe is uncomfortable. On the other hand, these strips are shorter and have an elastic side so that they can be mounted anywhere on the foot.
We suggest that you try them on before putting them on your feet to see how comfortable they are. This is because putting them in a bad place will trigger blisters. These strips are ideal for any sort of shoe because they are small but can fill in any gaps.
6. Reduce the size of the shoes
If you have some spare time and would like your shoes to fit correctly without having to stuff them with various items, we suggest shrinking them.
In terms of ingredients, this is a reasonably straightforward procedure. However, it would help if you took care not to harm the shoes themselves. Here’s how to shrink shoes to make them smaller:
i)To begin, decide the shoe’s material and whether or not water could be used on it.
ii)After that, make them wet. If you’re going to do this with a pair of athletic or casual shoes, soak them in water first. When it comes to suede or leather shoes, however, a spray bottle is needed.
iii)You may begin drying the shoes once they are fully wet. You can dry them outside if the sun is shining. If not, a hairdryer on the lowest setting would suffice. Often, make sure you’re not keeping it too close to your shoes, as this can hurt them.
iv)See if they fit better after they’ve dried fully. If they don’t, go through the process again. And if you dry them when wearing them, they will constrict around the shape of your feet for a truly ideal fit.
v)Finally, apply a condition kit to suede and leather accessories.
Three simple ways to reduce shoe size (without insoles)
Do you have any nearly-new shoes that don’t fit correctly in your closet? It makes sense why shoes might feel uncomfortable even when they are not precisely the proper size when there is just a baby fingernail’s width between the lengths of full shoe sizes? Here are three quick, low-cost methods for altering the fit of uncomfortable shoes.
Tighten the heel of the shoes.
Your heels won’t come out of your shoes if you put cushioned heel inserts in the rear. Utilizing heel grips is another practical way to stop shoes from rubbing against the back of your heels.
We have lived with them all of our lives and were startled to find that wearing shoes that are just a little bit too large is a common cause of heel blisters! Your feet move up and down in your shoes more frequently than they should, which is why your heels hurt.
We bought a 6-pack of Ballotte cushioned heel grips to try them out. We had low hopes because they were cheap and Chinese firms on Amazon may be hit or miss. Your heels won’t come out, though, if you put cushioned heel inserts in the back of your shoes.
Wear thicker socks.
Wearing thicker socks may also help to correct oversized shoes. It’s a straightforward idea that works well for boots, sneakers, and other closed-toe footwear.
My Fitflop Sumi ankle boots felt terrific underfoot, but after about 20 minutes of walking, the back of my heels started to itch. Wearing more giant socks was a quick and easy fix. No more agonizing heels.
We discovered that heavily decorated socks performed well. The socks are thicker and somewhat cushioned because of all the extra strands from the colorwork on the inside. It was bothersome that we could only wear particular socks with my boots, and Bosco socks aren’t always the best.
Also Read: 9 Tested Ways On How to Stop Shoes from Rubbing Achilles
How to wear big shoes?
- Obtain two or three pairs of socks. Wear them to thicken your feet. It is the simplest. The more fabric you can use, the better the shoe can suit your tiny feet. That approach allows you to wear athletic shoes and boots. However, it is not suitable for hot weather. Your feet would be very sweaty.
- Take some tissues, rags, or toilet paper with you. Place them on your toes. It will assist in fitting of your tiny feet into the shoe. This form can be worn with heels, flats, or boots. However, they are not suitable for just a long walk, even though they make you feel uneasy.
- Each shoe comes with an insole. Under your feet, this insole provides protection and cushioning. Some people complain about their insoles, but they do a great job filling in the gaps so that the shoe fits properly. Insoles are accessible at a low cost. The insole could be added to any shoe. It is preferable to try on insoles before buying them.
- Take ball footpads if at all necessary. Foot insoles are a pain to wear. These pads are designed to keep your feet relaxed and suit people of all sizes. Flats and heels are excellent options.
- Choose heel stripes. This strip will be uncomfortable, but it will give you more comfort to suit your feet. Heel strips can irritate your feet or trigger bristles. When you are faced with a problem, try to prevent it.
- To shrink the foot, apply water to it. When you get your shoes, they will shrink dramatically. If you’re going to use water, make sure to dry it in the breeze thoroughly. However, make sure your shoe isn’t water-allergic, otherwise, it will be ruined. If your shoe is made of leather, wet it with a spray can. Shoes should be soaked in sweat. After you’ve wet the foot, let it air dry. A hairdryer is also an option. However, certain materials, such as polyester, do not have this property.
- To tighten the foot, use an elastic band. It will offer a good result if you can sew the band into the foot. It will shrink the shoe’s dimension. Simply position the band inside the back of the foot, sew it, and tighten it. It can also be attached to a safety pin. Test to see if the band is correctly fitted.
For better results, go to a cobbler. If you buy a high-end and branded shoe, get it fitted by a professional
Shoe fillers will help you get the perfect fit for your feet. Fillers come in a variety of shapes and sizes. You must choose one that is comfortable for you.
Finally, you’ll know how to make big shoes fit smaller. what to do with our guide the next time you come across a pair of large shoes and are wondering how to make large shoes suit you. It’s up to you whether you try to make them smaller using our suggested approaches or try to fill in the gaps.
If all else fails, you should still seek professional assistance. Please let us know if you used any one of these approaches and which one was the most effective for you in the comments section below.
FAQS
Q: Can I tighten my shoes without using a shoe fitter?
A: Yes, you can make your loose shoes fit properly by tightening your shoe laces. The more you tighten, the lesser the likelihood of slipping out of the footwear. Also, you can wear thick shoes to fix the big size and fit well.
Q: Should I throw away the big shoes for not getting fit?
A: No because you can cover the extra room of shoes with some material to fit the foot better in the remaining area such as by using a toe filler in the tongue of shoes, placing an additional insole, placing heel liner, and using thick socks that will snug the shoes.
Q: Is it good to use an insole to make big shoes fit smaller?
A: Although an insole placement is one of the practical solutions to snug the shoes it can take away the comfort of the shoes’ own insoles. Also, in the case of slippers or casual footwear, it becomes troubling to get the most appropriate insole. To cope with this, you can use grip heel liners on the backside of the foot heel or toe filler in the mouth of the foot.
Also: How to clean inside of leather shoes? 10 Best Ways
Also: shoes causing blisters on back of heel? How to Eliminate?
Image Sources:
- https://www.wikihow.com/
- https://fashionandmash.com/
- https://www.haberler.com/
- https://www.healthline.com/
- https://www.businessinsider.com/
- https://www.scarletfreshshoe.com/
- https://thenewdaily.com.au/
- https://www.wikihow.com/
- https://www.wikihow.com/
No Responses